Satin is a float glass, one of the sides of which is processed using acid etching technology. This method of processing gives a velvety texture to the product and turns the glass into a completely different product. Due to the high level of light transmission and at the same time soft light diffusion, satin satin creates a particularly aesthetic and comfortable interior.
Our company is located in the Penza region. We have been operating since 2014, working with consumers throughout Russia, the CIS countries, and the European Union. Thanks to the smooth operation using modern European equipment, our production facilities can produce up to two million square meters of high-quality products annually. We are constantly working on product quality and service at all stages and levels. This applies to both the production process itself and the entire commercial service of our company. The assortment is very diverse: it is colorless satin glass with a thickness of 3 mm to 12 mm, tinted glass in various shades (bronze, gray, green, blue), frosted mirrors, satin chemically brightened glass, frosted glass, pre-painted on one side.
Due to the constant stock of finished products in the warehouse, we can provide any customer orders in the shortest possible time.
In addition to the standard sizes of satin, which are produced by other manufacturers, we can frost glass cut to the size of the customer.
Our product does not have a transparent perimeter edge after matting. This is very important, since the percentage of waste satinat decreases during further processing at the end consumer.
To produce frosted glass, we use only a high-quality base – this is transparent, tinted in the mass, thermally polished glass and mirrors from the best world manufacturers, such as AGC, SISECAM, Salavatsteklo, GUARDIAN, Saratovstroysteklo.
Satin is used in the design of furniture (cabinets, doors), wall cladding, glazing of shower cabins, the manufacture of kitchen, countertops, glazing of greenhouse complexes, the design of showcases for floors and partitions of both residential premises and shopping business centers.
| Name according to normative and technical documentation | -Technical Conditions TU 5912-001-56701000-2104 «Satinated glass, Technical Condition» -Federal Standard GOST Р 54164-2010 «Glass and glassware. Methods for determining optical characteristics: Determining light and solar characteristics» |
| Manufacturer | «Dekor Glass Povolzhye» Limited Liability Company (Russia, city of Penza) |
| Glass type | Satinated flat glass |
| Class | Sheet glass |
| Purpose | Purpose indicators correspond with requirements |
| Volume of certified batches/sample collections (pieces) | 90/5 |
| Nominal thickness of typical specimens, mm | 4,0 … 10,0 mm |
| Effective thickness, mm | 4,0 3,82 … 3,86+/-0,2 10,0: 9,92 … 9,96 +/-0,3 |
| Extreme deviation of dimensions | 4,0: -1,0 … +1,0 10,0: +1,0 … +2,0 |
| Difference of diagonal line lengths, mm | 4,0: 0 … +1,0 10,0: 0 … 0,05 |
| Variation on thickness, mm | 4,0: 0,01 … 0,03 10,0: 0 … 0,05 |
| Thickness deviation, mm | 4,0: 0,14 … 0,17 10,0: 0,04 … 0,08 |
| Evenness deviation, mm/td> | 4,0: 0,09 … 1,2 10,0: 0 … 0,01 |
| Appearance | No defects are present on all products and samples |
| Uniformity of depolishing between different sheets in one batch | Complies with requirements |
| Color coordinates | L=96,04 а=0,70 v=0,39 |
| Factors of transmission, reflection, light absorption, solar energy, and ultraviolet radiation | |
| LT — Light transmission in the spectral range of 380 to 780 Nm.% | 90 |
| DET – Percentage of solar energy that penetrates through the glass in the spectral range of 300 to 2500 Nm.% | 84 |
| UV — Ultraviolet radiation transmission in the spectral range of 300 to 380 Nm.% | 74 |
| LR – Light reflection in the spectral range of 380 to 780 Nm.% | 7 |
| EA – Percentage of solar energy absorbed by the glass in the spectral range of 300 to 2500 Nm.% | 9 |
+7 904 241 24 43